DRL Module
Posted: Tue May 09, 2000 5:28 am
For Jim Kelly: The DRL is a control module and is simple to install. There is no provision to disable the lamps except for a wire attached to the park brake. The lamps will go out if this wire is hooked up and the park brake is applied. I don't see why one couldn't install a toggle switch in the hot 12 volt side to disable the lamps. The headlamps will operate at about 80% intensity with the unit. The main purpose of the DRL is so that "others" can see you!! However that shouldn't be a problem with driving a motorhome but how many times did some j*** pull right out in front of you. DRL cuts down the odds that it will happen again. Bill Mehard FMCA F180579